Illinois Roofing License Practice Test

A roofer kneeling on a roof using a nail gun beside an extension ladder

Practice test

Question 1 of 17

0:00

What is the purpose of an eave cant beneath the first layer of slate?

A.Block water from entering through seams

B.Prevent snow buildup

C.Support the angle of the first course

D.Direct water toward the gutter

Which of the following metals is suitable for structural support in low-slope metal roofs?

A.Zinc

B.Lead

C.Copper

D.Aluminum

Which of the following enhances the fire-resistant properties of a low-slope roofing assembly the most?

A.Synthetic fabric used beneath membranes

B.Stone or granule-based surfacing

C.Specialized sealants and adhesives

D.Standard roofing bitumen or cold-applied adhesives

During ongoing construction, what is a key consideration for a temporary roofing system?

A.It must perform with the same durability as a finished roof

B.Temporary membranes may be incorporated into the final roof build

C.It must always serve as a vapor barrier

D.All crew members should avoid using the temporary surface

When does Worker’s Compensation typically apply in the roofing industry?

A.After an employee quits but continues health coverage

B.If an injury occurs during active job duties

C.When an employee’s family requires assistance

D.When someone needs retraining for a new role

Which incidents typically lead to the most lost work time among roofing professionals?

A.Exposure to hazardous materials

B.Injury to the extremities

C.Back-related injuries

D.Migraine or tension headaches

Which type of footwear is universally unsafe for roofing activities?

A.High-laced leather work boots

B.Non-slip sole shoes

C.Gym shoes or sneakers

D.Open-toe footwear with strap coverage

Which requirement confirms whether a roofing system contains asbestos?

A.Roofer’s visual assessment

B.Building owner’s word

C.Lab testing of roof materials

D.Review of architectural plans

How far above the landing surface must a ladder extend to comply with federal safety guidelines?

A.Just level with the surface

B.Within 12 inches

C.A minimum of 3 feet

D.12 to 18 inches above

What documentation must be submitted when applying for a roofing permit in Illinois?

A.Printed version of the contractor’s ID

B.Contact info for a local project manager

C.The full name and license number of the roofing contractor

D.Proof of insurance and bonding

What penalty can Illinois regulators impose for violations of roofing license laws?

A.Ban on licensing for 3 years

B.Monetary penalties up to $10,000 per offense

C.Up to 5 years disqualification

D.License revoked instantly

What is one recommended practice for improving a newly installed wood roof?

A.Apply asphalt cement at joints

B.Install extra underlayment layers

C.Avoid slopes under 4:12

D.Use synthetic felt under each row

Which are the primary functions of a roof deck?

A.Fire resistance, cold temperatures and water absorption

B.Structural support, fire resistance and accommodate building movement

C.Flexibility for non-stationary loads and adhesives

D.Water barrier under the membrane

Which tool should be used to manually mix asphalt in a kettle?

A.Asphalt chunks

B.Hollow tube to vent pressure

C.Solid pipe for heat retention

D.Non-conductive tool like wood

Why are pitch-pockets discouraged in roofing systems?

A.They require special adhesives

B.They violate common code

C.They’re costly to fabricate

D.They demand constant upkeep

When evaluating a roof for possible recovery, what is an important best practice?

A.Assume top-down deterioration

B.Conduct cuts to assess condition

C.Check from underneath only

D.Expect fasteners to be visible from below

How should slate be secured to the deck?

A.With black iron nails

B.Any corrosion-resistant nail

C.Electroplated fasteners

D.Copper nails specifically

Back

Submit Test

Your results

0:00

Score: 0 / 17 (0%)

70%

Retake test

Frequently asked questions

Is the Illinois roofing license exam hard?

Yes, most people find it difficult, even with roofing experience. The exam is about theory, building codes and Illinois law rather than what you do on a roof, and it is timed. Our students pass at 98%, because we teach exactly what the exam asks.

How often is the Illinois roofing exam offered, and when is the deadline to register?

The state offers the roofing exam six times a year, and registration closes 28 to 30 days before each exam date. That is why our classes run on the exam schedule. Pick the exam date you want, register before the deadline, and we will get you ready in time.

Do I need to take a class to pass the Illinois roofing exam?

No, the state does not require a class, but we strongly recommend one. The exam tests theory and regulations, not installation, so twenty years on a roof does not prepare you for it on its own. Our class is built for first-timers and veterans alike, and every study material is included.

How do I register for the Illinois roofing exam?

You register with Continental Testing Services at continentaltesting.net, exam fee is $248. When you register for our class, we help you fill out the forms, so nothing gets missed. The exam fee is separate from the $125 license application fee paid to the IDFPR.

Illinois roofing license practice test

Get ready for the Illinois roofing license exam